Differences

This shows you the differences between two versions of the page.

--- xml_script [2011/04/22 19:41]
hermann
+++ xml_script [2026/07/22 20:27] (current)
hermann
@@ Line 1: / Line 1: @@
-====== XML Script ======
+====== EGOML Script ======
 ===== Overview =====
-Model can be saved as a XML document. The resulting file uses the extension ".xml".
+Any model can be saved as an EGOML document. The resulting file uses the extension ".egoml" (the old extension ".xml" is still supported for backward compatibility). See [[basic_data_flow|Basic Data Flow]] for the execution model shared by EGOML and [[ego_script|EGO Script]]; this page covers the XML notation specifically.
-Using the XML format is possible to write incomplete script having functors whose input and output ports are not completely bound. This allows saving models in the first development stages.
+The EGOML file is an XML document written according to the following DTD; see [[https://www.w3schools.com/xml/xml_dtd_intro.asp|w3schools' DTD tutorial]] for a good introduction to the DTD description syntax:
-The XML document is written according to the following DTD ((A good introduction to the DTD description syntax can be found at http://skew.org/xml/tutorial.)):
 <code dtd>
 <?xml version="1.0"?>
 <!DOCTYPE script [
-    <!ELEMENT script (property*, functor*, containerfunctor*)>
+  <!ELEMENT script (property*, functor*, containerfunctor*)>
+  <!ELEMENT functor (property*, inputport*, outputport*)>
+    <!ATTLIST functor
+      name   CDATA  #REQUIRED>
+  <!ELEMENT containerfunctor (property*, inputport*, outputport*, internalinputport*, internaloutputport*, (functor|containerfunctor)*)>
+    <!ATTLIST containerfunctor
+      name   CDATA  #REQUIRED>
+  <!ELEMENT property EMPTY>
+    <!ATTLIST property
+      key  CDATA  #REQUIRED
+      value  CDATA  #REQUIRED>
+  <!ELEMENT inputport (#PCDATA)>
+    <!ATTLIST inputport
+      name   CDATA  #REQUIRED
+      peerid IDREFS #IMPLIED>
+  <!ELEMENT outputport EMPTY>
+    <!ATTLIST outputport
+      name   CDATA  #REQUIRED
+      id   ID   #REQUIRED>
+   <!ELEMENT internalinputport EMPTY>
+    <!ATTLIST internalinputport
+      name   CDATA  #REQUIRED
+      peerid IDREFS #IMPLIED>
+  <!ELEMENT internaloutputport EMPTY>
+    <!ATTLIST internaloutputport
+      name   CDATA  #REQUIRED
+      id   ID   #REQUIRED>
+]>
+</code>
-    <!ELEMENT functor (property*, inputport*, outputport*)>
+==== Elements ====
-        <!ATTLIST functor
-            name   CDATA  #REQUIRED>
-    <!ELEMENT containerfunctor (property*, inputport*, outputport*, internalinputport*, internaloutputport*, functor*)>
+Each element in the DTD corresponds directly to a piece of the underlying functor graph described in [[basic_data_flow|Basic Data Flow]]:
-        <!ATTLIST containerfunctor
-            name   CDATA  #REQUIRED>
-    <!ELEMENT property EMPTY>
+  * ''script'' is the model as a whole — the root element, holding the model's own properties plus every top-level functor and container.
-        <!ATTLIST property
+  * ''functor'' is a single functor call, identified by its ''name'' attribute (such as ''LoadMap''). It holds its own properties, its input ports, and its output ports.
-            key    CDATA  #REQUIRED
+  * ''containerfunctor'' is a functor that also holds nested functors and containers — the same element type can nest inside itself, since containers can be placed inside other containers.
-            value  CDATA  #REQUIRED>
+  * ''property'' attaches metadata to whatever element contains it, as a ''key''/''value'' pair. Keys are always written fully expanded — there is no property alias as in the [[ego_script|EGO Script]] format.
+  * ''inputport'' and ''outputport'' are a functor's connection points. An ''outputport'' declares an ''id''; an ''inputport'' elsewhere in the document references that ''id'' through its own ''peerid'' attribute to form a connection — the XML equivalent of two functors sharing a variable name in EGO Script.
+  * ''internalinputport'' and ''internaloutputport'' work the same way, but connect a container to the functors nested inside it, rather than connecting two ordinary functors to each other.
-    <!ELEMENT inputport (#PCDATA)>
+The DTD defines no equivalent of EGO Script's abbreviated calculator syntax. Every functor in the Calculate family — ''CalculateMap'', ''CalculateLookupTableValues'', and the others — is represented the same way as any other container: its operands are connected through explicit ''NumberMap''/''NumberTable''/''NumberValue'' hook functors, as shown in the ''CalculateMap'' example below. See [[ego_script#calculator_functor_shorthand|Calculator functor shorthand]] for the two syntactic forms EGO Script provides for this same underlying structure.
-        <!ATTLIST inputport
-            name   CDATA  #REQUIRED
-            peerid IDREFS #IMPLIED>
-    <!ELEMENT outputport EMPTY>
-        <!ATTLIST outputport
-            name   CDATA  #REQUIRED
-            id     ID     #REQUIRED>
-     <!ELEMENT internalinputport EMPTY>
-        <!ATTLIST internalinputport
-            name   CDATA  #REQUIRED
-            peerid IDREFS #IMPLIED>
-    <!ELEMENT internaloutputport EMPTY>
-        <!ATTLIST internaloutputport
-            name   CDATA  #REQUIRED
-            id     ID     #REQUIRED>
-]>
-</code>
-The resulting document is not formated using tabs, spaces or newlines. Those characters are written only when they are inside the definition content, not in the content boundaries.
+==== Example ====
-Below it is an example of a XML script:
+Below is an example of an EGOML script used to load a map, calculate an image convolution, and save the result:
-<file xml apply-edge-detection-convolution.xml>
+<code xml>
 <?xml version="1.0" standalone="yes" ?>
 <script>
-  <property key="dff.date" value="Fri Apr 22 16:07:49 2011" />
+  <property key="dff.charset" value="UTF-8" />
-  <property key="dff.version" value="1.6.2.20101213" />
+  <property key="dff.date" value="2026-Jul-21 14:32:07" />
-  <property key="metadata.author" value="Dinamica Team" />
+  <property key="dff.version" value="8.12.0.20260626" />
+  <property key="metadata.author" value="Dinamica EGO Team" />
   <property key="metadata.description" value="This is an example of map algebra expression written in Dinamica’s Calculate Map functor. This functor also performs contextual image operation, such as edge detection filters using nbConvol expression." />
   <property key="metadata.organization" value="CSR / UFMG" />
@@ Line 61: / Line 73: @@
   <property key="metadata.title" value="Apply Edge Detection Convolution Easier" />
   <functor name="LoadMap">
-    <property key="dff.functor.alias" value="input map" />
+    <property key="dff.functor.alias" value="Input Map" />
-    <inputport name="filename">"../../lesson1/amazon_states.tif"</inputport>
+    <inputport name="filename">"C:/Desenvolvimento/Centro-De-Sensoriamento-Remoto/lesson1/amazon_states.tif"</inputport>
-    <inputport name="loadAsSparse">.no</inputport>
+    <inputport name="nullValue">.none</inputport>
-    <inputport name="defineNullValue">.no</inputport>
+    <inputport name="storageMode">.default</inputport>
-    <inputport name="nullValue">0</inputport>
     <inputport name="suffixDigits">0</inputport>
+    <inputport name="firstWindowCoordinateX">.none</inputport>
+    <inputport name="firstWindowCoordinateY">.none</inputport>
+    <inputport name="secondWindowCoordinateX">.none</inputport>
+    <inputport name="secondWindowCoordinateY">.none</inputport>
     <inputport name="step">.none</inputport>
     <inputport name="workdir">.none</inputport>
     <outputport name="map" id="v1" />
+  </functor>
+  <functor name="LookupTable">
+    <inputport name="constant">[ "Key" "Value", 1 1 .. 4 1, 5 -8, 6 1 .. 9 1 ]</inputport>
+    <outputport name="object" id="v2" />
   </functor>
   <functor name="SaveMap">
-    <property key="dff.functor.alias" value="saved map" />
+    <inputport name="map" peerid="v3" />
-    <inputport name="map" peerid="v2" />
+    <inputport name="filename">"C:/Desenvolvimento/Centro-De-Sensoriamento-Remoto/dinamica/Release/output.ers"</inputport>
-    <inputport name="filename">"output.ers"</inputport>
     <inputport name="suffixDigits">0</inputport>
     <inputport name="step">.none</inputport>
     <inputport name="useCompression">.yes</inputport>
     <inputport name="workdir">.none</inputport>
+    <inputport name="ignoreCostlySparseCategories">.yes</inputport>
   </functor>
   <containerfunctor name="CalculateMap">
-    <property key="dff.container.collapsed" value="yes" />
+    <property key="dff.functor.alias" value="Edge Map" />
-    <property key="dff.functor.alias" value="edge map" />
     <property key="dff.functor.comment" value="Image convolution in Dinamica EGO" />
     <inputport name="expression">[ nbConvol(i1, t1, 3, 3) ]</inputport>
@@ Line 88: / Line 106: @@
     <inputport name="nullValue">0</inputport>
     <inputport name="resultIsSparse">.no</inputport>
-    <outputport name="result" id="v2" />
+    <inputport name="resultFormat">.none</inputport>
+    <outputport name="result" id="v3" />
     <functor name="NumberMap">
-      <property key="dff.functor.alias" value="numberMap1215" />
       <inputport name="map" peerid="v1" />
       <inputport name="mapNumber">1</inputport>
     </functor>
     <functor name="NumberTable">
-      <property key="dff.functor.alias" value="numberTable1216" />
+      <inputport name="table" peerid="v2" />
-      <inputport name="table">[ "Key" "Value", 1 1 .. 4 1, 5 -8, 6 1 .. 9 1 ]</inputport>
       <inputport name="tableNumber">1</inputport>
     </functor>
   </containerfunctor>
 </script>
-</file>
+</code>
+The same model, expressed in EGO Script:
+<code>
+@charset = UTF-8
+@date = 2026-Jul-21 14:32:07
+@version = 8.12.0.20260626
+@author = Dinamica EGO Team
+@description = This is an example of map algebra expression written in Dinamica’s Calculate Map functor. This functor also performs contextual image operation, such as edge detection filters using nbConvol expression.
+@organization = CSR / UFMG
+@showproperties = yes
+@title = Apply Edge Detection Convolution Easier
+Script {{
+    inputMap := LoadMap "C:/Desenvolvimento/Centro-De-Sensoriamento-Remoto/lesson1/amazon_states.tif" .none .default 0 .none .none .none .none .none .none;
+    lookupTable0 := LookupTable [
+        "Key" "Value",
+1 .. 4 1,
+-8,
+1 .. 9 1
+    ];
+    // Image convolution in Dinamica EGO
+    edgeMap := # [
+        nbConvol(#inputMap, %lookupTable0, 3, 3)
+    ] .int32 0 .no .none;
+    SaveMap edgeMap "C:/Desenvolvimento/Centro-De-Sensoriamento-Remoto/dinamica/Release/output.ers" 0 .none .yes .none .yes;
+}};
+</code>